E2 Error

Description: Accelerator Failure

Repair Time: 5 Minutes

Repair Instructions: Replace Handlebar Assembly

1. Unscrew the handlebars from the shaft (4mm or Philips)
2. Disconnect the brake line from the brake lever
   1. You can either completely unscrew the brake adjuster bolt and pull it out, or align it so you can pull the brake line through the bolt
   2. Disconnect the end of the brake line from the holder on the brake lever by pulling the lever so you have access to it

1. Slide the handlebars out of the shaft
2. Disconnect the handlebar wire
3. Do in reverse to put the new handlebars on