Description: Throttle Failure
Repair Time: 20 Minutes
Repair Instructions: Replace Throttle
- Take off the screws on the sides of the handlebar head and under the headlight (Philips)
- Disconnect the brake wire from the handlebar
- Unscrew the right handlebar grip
- Take the handlebar head off the scooter
- Take out the 4 screws inside the handlebar head, this will allow you to take off the plastic display cover
- Unplug the wire connecting the handlebar to the scooter
- Take off the 2 bolts holding the headlight on (5mm)
- Take off the 3 screws holding the display into the handlebar head (Philips)
- Unplug the throttle wire from the display and pull it out of the handlebar head
- Remove the old throttle from the handlebar (2.5mm)
- Feed the new throttle wire into and connect it to the display
- Put in the 2 headlight bolts (5mm)
- Connect the scooter wire to the display
- Screw in the 3 display screws (Philips)
- Put handlebar head back on the scooter
- Connect the brake wire
- Screw the right handlebar grip back in